Showing posts with label green. Show all posts
Showing posts with label green. Show all posts

Tuesday 20 January 2009

Eco-Wool Loft Insulation

So now I'm cold, the reason being I've just been in our loft to take the most boring picture (right). But cold is good, right? That means my loft insulation must be working quite well on this cold winters evening. After my previous eco-minded post about our new LED light I thought I'd put up some info about another of our recent projects at home, insulating the loft.

It's a pretty simple job if somewhat cramped, dark and grim. It's well worth doing though as we can testify to having a warm house, cold loft, and doing well in the "who's roof melts the frost first" competition in our street. Loft insulation is supposed to be about the best bang-for-your-buck thing to do in terms of home efficiency; I've definitely noticed our radiators coming on a lot less. We're now up to a whopping 300mm insulation so well above the rafters and above what I still think is the recommended minimum of 250mm.

The real reason behind this post though is to say be careful when choosing what product you use. Don't just go to the local hardware store and buy the bulk standard "space blanket". Grand though it may sound those products are said to cause quite a lot of harm during manufacture. I've fitted Eco Wool (terrible web site, decent product) which is available in the UK through B&Q. While not the most ecological product ever (it uses 15% polyester for binding) it does use recycled plastic for the most part. It's very thick and has pretty good insulating properties, cheap and is easy to get hold of.

Unlike my post about our LED light I can't finish on any drawbacks with this one, there are none. Go insulate your loft, and think about what you lay first! Eco-warrior over and out.

Sunday 18 January 2009

LED Lighting


We're having a little bit of work done on the house and as part of that I had to move the outside light by the front door. On further inspection I found the old light wasn't going to cut the mustard in the new location, it wasn't going to be waterproof for one, which is sort of important. So a great excuse as if any were needed to buy something new and funky!

The obvious choice to me was to look into whether LED lights are available for outside lighting. Imagine my surprise when I found it seems they're actually getting quite commonplace and we were able to nip down to our local DIY store and pick one up. For some reason I was expecting to hunt around Internet sites and order one. The pictures shows what we bought. It's a fairly small chrome effect affair with two plastic panels beyond which are mounted a total of 24 white LEDs, 12 of these are at the front and 12 to the rear.

It provides plenty of light, not massively bright and offensive like security lighting, but easily enough to see your way up the drive to the doorway. The best part of this, as with all LED lighting, is the power usage. My current cost meter doesn't budge when it's turned on, not even a sniff of a change in power usage. Assuming I've not wired it up to some free electric supply I'm not aware of, or accidentally stolen from our neighbours, I can only conclude all 24 LEDs are using less than one watt of power. It's my first LED installation at home and almost certainly wont be the last.

I hate to finish on a downer but there are drawbacks of course. The LEDs are not replaceable so if one dies, however unlikely, you have to put up with it looking silly or replace the entire light. The other is the colour of the light, we've all been brought up with tungsten lighting so the colour of LED light does take a little getting used to.

Wednesday 26 November 2008

Daily Electricity Bill

Way back at the end of July I started looking into how to graph current cost data. I was looking at this from the point of view of putting the information together on a web page somewhere and potentially sending out useful information via e-mail to me and Beth on our power usage.

Recently I've been looking into this again and over the past couple of weeks we've been receiving a daily HTML formatted e-mail with an attached graph image that might look something like this:


This is a really handy reminder each day to try and be as green as possible but also to show us how we did on the previous day. The graph shows two lines, the red one showing the actual power usage in watts and a straight blue line showing our average usage for that day.

Also attached to the e-mail are the charges and a few summary statistics for the day. So on the example above you can see we averaged 240 watts throughout the day with our minimum usage recorded as 61 watts and maximum usage as 2359. The total usage doesn't mean very much without time associated with it, but I've listed it there all the same. The total can be used to work out the kWh reading for the day, total divided by 1440 minutes in the day (and points on the graph) divided by 60 minutes in an hour.

The costs are rather crudely calculated. We're charged for electricity on two levels, our first 225kWh per quarter are at a higher rate than any usage thereafter. For us, this averages out at around 10 pence per kWh cost so that rough average is used to calculate an estimate for the total cost in GBP.

This only a really simple way in which the current cost data can be used, Dale is way ahead of me on other applications for the data. I intend to extend the e-mail we're getting at the moment to integrate into a little web system we can use at home to log in and look through historic records of our usage and also produce other summaries such as weekly or quarterly usage. Also, the ability to add notes to each day will needed so when we look back over historic data we might have recorded what particular spikes in our usage are. All this is an effort to educate ourselves more in our power usage so we can change our behavior to be more efficient with it.

Friday 19 September 2008

Turning my house off

HE-307
After talking recently about the stand-by power savers I've been messing with at home I've made another small investment in the Home Easy range. We now have a switch I've located downstairs we can use to turn one or more sockets off in the house. It's a small step I know, but this simple device will effectively become the on/off switch for our house. Currently, we're only using it to control one socket to switch off all the electrical gadgets in the living room such as the TV, DVD hard disk recorder, Wii, etc.

I like the idea of being able to turn your whole house on/off. So this switch has the potential to be extended should I make further investment into Home Easy kit. We could eventually have computer controlled devices all around the house to activate lighting or any electrical device. With one press of this button the whole lot would turn off in order to make power savings as we leave the house or overnight though. As well as saving some cash it gives you a great green feeling of energy saving too, safe in the knowledge that only the essentials are left on at home. For us right now, the essentials are the home server, network router, our fridge-freezer and currently a second freezer to store our surplus vegetables from the allotment. These typically use 130 watts as an average total which goes down from something like 170 watts I think when we turn off the stand-by switch.

I was hoping for a certain amount of traction and community to build up around the Home Easy range, being the first reasonably complete and affordable range of radio controlled devices in the UK. However, that doesn't seem to be the case. I have loads of little questions I would love to ask Home Easy, mostly about future products and their intentions. So far, it's been difficult to communicate with them or other users of the products. For example, their web site has a forum link with a few registered users on the forums, including some staff from Home Easy. In order to get access though, you have to e-mail one particular guy and wait for him to approve your access which isn't ideal. I e-mailed several months ago and I'm still awaiting my ID. Conclusion, the forum isn't very active and the community I was hoping for doesn't exist, yet.

Tuesday 29 July 2008

Graphing Current Cost

After hooking up my Current Cost Meter to a database recently I've been logging my power usage so the next step is to look at what I can do with the data. As I mentioned when I introduced my meter lots of other people have been looking into this as well.

I like Dale's idea for creating a daily energy bill so I've decided to aim towards that but include a graph of the days usage and possibly a link to a web page where I can look at more details of that days use.

With the web page idea in mind I decided to look into what I could do graph wise in PHP since that's my web language of choice. After looking through a few options I plumped for the obvious library, that of PHP Image Graph as it's part of PEAR so should be fairly decent, complete, well used and flexible. Here's where I'm at so far:
That's just a small snipped of 1 days power usage when I was cooking dinner. You can see I turned on my steamer (approx 800 watts) at about 5:30pm then went on to turn on the oven which heated up then cut in and out while it was cooking before I turned it and the steamer off just before 6pm.

As you can see, I'm pretty much there with the graphing side of things. The only issue left is to sort out the X axis. While it might appear to be a bit crazy, the current cost meter only samples approximately every 6 seconds. Because of the different number of samples in each hour and with a few rounding errors, the X axis appears not to be linear. Hopefully, I'll solve this by ensuring a consistent number of samples in each time slot.

Overall, PHP Image Graph seems very powerful. You can graph pretty much anything with it in all sorts of formats and have relatively complete control over the way the graph looks. I'm not at all artistic so mine looks very plane! There is, however, a reasonable barrier to entry. Documentation for the API is relatively complete if you know where to start, but documentation in general seems really rather thin on the ground and very sketchy. But, thankfully someone produced a great set of demos for a PHP conference that really show off a lot of the features. The source is available too so it's easier to work out what to do with your own graphing and how to get started. I'll probably blog my source code at some point, it's not very long, but definitely requires some tidying before it's ready for a public outing.

What I want to do next is take the graph and produce some sort of daily "bill" e-mail. That will have a link back to a private area on my web site that would allow closer inspection of certain areas of the graph. This is just the next step in education for how to save electricity by learning how much different combinations of devices use together. For example, is it better to steam fish in a steamer, grill, oven cook, etc. Hopefully, I'll be able to apply those sorts of questions all around the house to work out how to be as green as possible.

Wednesday 23 July 2008

Next Generation Linux

The folk following me on Twitter are probably sick of hearing about identity management, the main stay of my work this year. So I was glad to get out of the office last week to present at an IBM conference in London called "Next Generation Linux". A thank you note I received reminded me I should blog about it, always nice to receive those! Next Generation Linux is an event IBM are running in various worldwide locations this year looking at what comes next for Linux for businesses.

Being a Linux geek working in a software services organisation called Emerging Technology Services and with my contacts I like to think I was the natural choice for the pitch titled "Emerging Linux Technologies". I only had a short amount of time to present a vast field of topics so I narrowed it down to just five topics compelling for business and talked about the following:
  1. Virtualisation
    OK, not strictly an emerging technology as many businesses have already adopted it. But, it was a good opener setting the scene for some of my other topics and allowed the opportunity for me to briefly run through a few virtualisation technologies for Linux.
  2. Cloud Computing
    An exciting name and concept for what is essentially some very well thought out system administration. This technology has always been feasible but it's being made possible now with commodity hardware capable of remote management and some neat software ideas holding it all together. The really novel thing is the way applications can be deployed to run in the cloud environment and the fact we can actually package this up as a solution now. It's the realisation of "On Demand" computing.
  3. Project Big Green
    Green computing is becoming much more of a concern as business starts to run out of room in data centers, power requirements head skywards and running costs steadily increase. Last year IBM announced a re-investment of $1 billion into research towards green computing which gives business the opportunity to cut running costs and jump on the green band wagon at the same time. Green computing is essentially about consolidation of services, allowing spare compute power to be utilised elsewhere, and making sure equipment is environmentally produced and disposed of. It's those three words we hear in all good green campaigns, reduce-reuse-recycle, do it!
  4. Security Enhanced Linux (SELinux)
    One of my specialisms and a topic I could ramble on about for a long time, I'll try to keep it brief. In this short pitch I indicated security is still an issue in 2008 and it can cost you big time if your security is breached. Enter SELinux, an overview of what SELinux is and where it comes from and a comparison with other technologies such as AppArmour is a good start. To get to the crunch of SELinux though, I explain the differences between Discretionary Access Control (DAC) and Mandatory Access Control (MAC) and the ultimate advantages SELinux brings for security.
  5. Real Time Linux
    Real time really is an emerging area with both of IBMs current Linux partners, Red Hat and SUSE, bringing out offerings recently. Real time is built from the hardware up through the OS and in the case of hard real time into the applications too. IBM have certified some particular System X hardware to be real time capable and provide firmware and support for this now. Next comes the Linux piece where some of the firmware functionality removed from hardware must now be implemented in the kernel, there's loads of ways of doing this but to get support for it SUSE and Red Hat take care of that. IBM have also built some enhancements to Java, by introducing a modified garbage collector (Metronome) and providing ahead of time (AOT) compilation while complying with RTSJ, all of which add up to the ability to write real time Java apps - interesting! Now we can offer a full real time system on non-specialised hardware, using a commercially available operating system and a language loads of people can program, backed by IBM through Websphere Real Time. Boy that sounds like an advert, sorry about that, but it is a great idea, very cool!

This is all very much in brief, if you want to know more then get in touch or leave a comment.

Tuesday 22 July 2008

Current Cost Monitor

A couple of guys at work have managed to lay their hands on a funky new device called a Current Cost meter. It's pretty simple to understand, it measures your household electricity usage and displays it on the screen (left). To do this it comes in two parts, you hook a plastic loop around the live feed going into your fuse box (mine is in the garage) which is connected to some electrical wizardry I don't understand to measure the current without interfering with the wire, and a wireless transmitter device to send the data to the unit you just plug in somewhere in your house.

I jumped at the chance to get one of these things and was one of the first batch to get them at work and a little community of current cost users has built up pretty quickly. That said, pretty much everyone else has beaten me to blogging about it with some very cool results. So here's the list (that I know of) right now, in no particular order we have...As an aside, Dale's just joined my department at work (horay), and Roo is leaving IBM (boo and much sobbing).

There's lots of other people looking into these things too, but those are just the blogs I know about. This type of device isn't exactly new, but what makes this one exciting is the data port and connectivity to a computer. With such a community there's been some cool work done such as graph power usage and send yourself a daily electricity bill. The device itself can't really save you money and definitely doesn't save energy (you have to plug it in) but what it does do a great job of is educating you about exactly what all your household devices like to eat for breakfast.

I'm just starting out at home having had the screen in the kitchen for a couple of months already with looking at what I can do with it while connected to a computer. I'm now logging all the data to a database so I guess one of the first things I'll be doing is graphing my own data. From that I hope to learn even more about what my house does with its power. For now though, the only graph I have (above) is that produced by sending my data via a Nanobroker to Andy Standford-Clark's server. This should hopefully be another fruitful little project for my new (and now you know why it's low power) home server.

Friday 11 July 2008

Introducing Home Easy

One of the things I've been giving consideration to while choosing my media server is home automation. I don't want to go crazy about it and have everything in the house hooked up to a computer so curtains open when alarm clocks go off, or alarm clocks go off earlier if it's freezing outside (to give more time to scrape ice), etc. I'm more interested in a few subtle things to help be more green at home, and possibly to help with security, anything I can get that adds convenience is a bonus but not necessary for me.

The first simple step I've taken along this road is to get some stand-by power savers that are getting ever more popular these days. The one I went for was the introductory pack from the Home Easy range which are manufactured by Byron and retailed exclusively through B&Q.

The pack gives you three radio controlled sockets into which you can plug your devices at home, and a remote control to turn on/off the sockets. So, by plugging in my TV, DVD, Wii, and other devices to one of these via their 4-way extension lead I can turn off a whole bunch of stand-by with the click of a remote control button anywhere in the house.

The Home Easy range is relatively complete for a UK home automation solution not based on X10. The kit is reasonably priced too with the 3 sockets and remote costing £20, unlike X10 end points. One of the reasons for choosing Home Easy over another popular standy-by saver is that the range is more complete, but also the protocol is well known so third parties are starting to produce devices compatible with Home Easy too. For example, rfxcom have certified their transceiver to work with Home Easy so it's now possible to computer control Home Easy devices - nice!

The next tentative steps I'll be looking to take on this road are having a home on/off switch. It's annoying having a single remote control, it's small, you have to find it, and it might be upstairs/downstairs and probably not where you are. I want to take advantage of the home easy grouping facility to have a switch that basically turns my house on or off. We should be able to leave the house (or go to bed) and turn all the stuff we're not using off, and turn back on again when we get home (or wake up).

Just this one purchase can save me anywhere between 20 and 50 watts in stand-by power. At 10 pence per kilowatt hour (typical rate) I'll get my £20 back with just 6 months usage. So it's green and saves you some dosh too, bonus!